V-D13F SERIES R900

APPLICATIONS
PORTABLE PA
LIVE SOUND
INSTALLED SOUND

Delivering up to 2200 Watts of high voltage output with ultra-precision in an ultra-light 1U form factor, the R900 is an extremely versatile 2-channel amplifier that combines sustained performance and exceptional reliability with significantly low cost of ownership.

The extended 22% duty-cycle capability of the V-D13F Series with a prolonged 22ms ON – 78ms OFF output configuration ensures the highest in class headroom and coupled with the FPC™ class of power supplies – time indefinite operation, eliminating the need for more expensive high-power amplifiers and significantly reduces the number of amplifiers thereby minimizing rack space and cost.

Incorporating our proprietary KNM™ Drive, every V-D13F amplifier delivers audiophile performance with a THD of no more than 0.0004% at its rated output across the frequency range while its Active Damping system (DF > 2000) virtually eliminates the limitations associated with long cable runs, making it the preferred choice for a wide range of light-duty portable sound reinforcement applications as well as Install applications and where intelligibility is mission critical.

Powered by our revolutionary FPC™ class of power converters, the V-D13F series amplifiers offer universal operability operating from 90VAC to 290VAC and are built to be immune to 490VAC making them the most rugged and reliable platform in its class, which combined with an energy efficiency of >90% (across line & load conditions) contribute to significant cost savings in terms of energy and infrastructure.

Amplification
• Proprietary KNM™ Drive
• “Audiophile” Precision: THD < 0.0004% at rated output
• High Power Density: 2200 Watts through 2 Channels in 1U; Bridgeable Outputs
• Extreme Performance with Active Damping, DF > 2000
• Widest in class Frequency Response and Power Bandwidth; FR 4Hz – 40kHz for ultra-flat tone; Equally suited for Low, Mid and High frequencies
• Highest in class Operational Duty Cycle of 22% (22ms ON – 78ms OFF) for indefinite sustained performance under the most demanding audio program load.

Power Supply
• Ultra-Rugged FPC™ class power converter
• Universal Operating Range: 90VAC to 290VAC
• 490VAC Proof; fully protected against Open Ended Floating Voltages
• Fully regulated output with integrated PFC for reduced energy costs
• Able to operate on “Dirty Mains” with up to 20% Harmonics; Eliminates the need for power conditioners
• Automated Power Draw ramping eliminates the need for power sequencing devices
• Ultra-efficient, Energy efficiency > 90% across Line and Load conditions for reduced energy footprint

Form Factor
• Compact 1U form-factor for all models; reduced rack space
• Light weight for greater portability: weighs less than 6.5kg

Additional
• Black Antenna™ architecture: Total immunity to EMI and RFI; Eliminates the need for EM and RF suppression devices
• Active Thermal Management with FMD for continuous operation in extreme ambient temperature conditions ranging from 0°C to 45°C
• Balanced and Buffered Inputs for easy daisy-chaining
• On-board user-defeatable pre-configured Analog Signal filters (Low-Pass and High-Pass) for greater flexibility
• User-friendly MFD with Tactile Control

Comprehensive Protection Suite With Ultra-Fast Analog Computing system for Zero-Latency monitoring and control
• DC Protection
• VHF Protection
• Output Soft Start
• Output Overload and Short Circuit Protection
• Peak Current Limiting
• Under Voltage and Over Voltage Lock Out system with active auto reset
• Inrush Current Limiting
• Protection from Line Transients
• Thermal Limiting and Thermal Overload Protection

V-D13F R900 TECHNICAL SPECIFICATIONS
RATED POWER OUTPUT
(ALL CHANNELS DRIVEN; 20 – 20000Hz) INDEPENDENT CHANNEL MODE BRIDGE MODE
2ΩTLBP
2x 1100W 2x 1100W 2x 1100W 1x 2200W
PEAK OUTPUT VOLTAGE 144V
TOTAL HARMONIC DISTORTION Less than 0.0004% @FULL POWER
DAMPING FACTOR Greater than 2000
SIGNAL TO NOISE RATIO Greater than 120dB-A
CROSSTALK/ CHANNEL SEPERATION Greater than 120dB-A
FREQUENCY RESPONSE 4Hz – 40kHz
INPUT SENSITIVITY 1.774VRMS (7.2 dBu)
INPUT CONFIGURATION BALANCED; BUFFERED
INPUT FILTERS HIGH PASS; LOW PASS
INPUT FILTER CONFIGURATION PRECONFIGURED; USER BY-PASSABLE
USER INTERFACE MFD (LED); TACTILE CONTROLS
PROTECTION AND MONITORING DC ; VHF ; O/P OVERLOAD AND SHORT-CIRCUIT; PEAK CURRENT LIMITING; UNDER VOLTAGE / OVER VOLTAGE; INRUSH CURRENT LIMITING; LINE TRANSIENTS; OPEN ENDED FLOATING VOLTAGE; THERMAL LIMITING, THERMAL OVERLOAD
THERMAL MANAGEMENT ACTIVELY CONTROLLED FAN MOTOR DRIVE; MULTI-MATRIX
ENVIRONMENT (OPERATION) 0°C TO 45°C ; 0 – 90% R.H. (NON-CONDENSING)
MAINS 90VAC ~ 290VAC ; 45-63 Hz ; 490VAC PROOF
FORM FACTOR 1U (44mm) x EIA 19″ (483mm)

CORPORATE PROFILE

NEWS & EVENTS

SERVICE REQUEST FORM

PRODUCT REGISTRATION

DONT BE SHY! GET IN TOUCH.

SEE THE MAGIC HAPPEN FIRST HAND. SCHEDULE A DEMO AND EXPERIENCE ELECTRONIC WIZCRAFT

TO BECOME OUR RESELLER OR FOR ANY OTHER REQUESTS, FEEL FREE TO REACH OUT TO US.

SIGN UP FOR OUR NEWSLETTER & NEVER MISS AN UPDATE.